MUFFLE FURNACE
Estimated Delivery
→ Warranty: 12 months from the date of supply against manufacturing defects. However consumables like Heating Rods, Thermocouples, Bulbs, Fuses, Switches etc., are not covered under this Warranty.
→ If Transportation and Installation needed it charges extra.
The purpose of muffle furnaces is to heat materials to exceptionally high temperatures while isolating them from fuel and the combustion byproducts associated with the heat source. This isolation minimizes the risk of cross-contamination and facilitates the identification of specific material properties.
Features:
-
The heating chamber is constructed from a sillimanite muffle, featuring a smooth surface for optimal performance.
-
Strategically placed throughout the chamber are imported “Kanthal A1” heating elements.
-
The chamber includes well-insulated ceramic pads to enhance thermal efficiency.
-
The outer structure is made of mild steel (MS) and is finished with a durable powder coating.
-
An over-temperature cutoff fuse is installed to prevent accidental overheating.
-
The maximum operational temperature is set at 1150 °C, with a recommended operating limit not to exceed 1020 °C.
-
Temperature accuracy is maintained within a tolerance of ±2 °C.
| TECHNICAL SPECIFICATION | |||||
| MODEL NO | SSMF01 | SSMF02 | SSMF03 | SSMF04 | SSMF05 |
| Internal Dimensions (inches) | 4 x 4 x 9 | 5 x 5 x 10 | 6 x 6 x 12 | 8 x 8 x 12 | 12 x 12 x 12 |
| Internal Dimensions (mm) | 100 x 100 x 225 | 125 x 125 x 250 | 150 x 150 x 300 | 200 x 200 x 300 | 300 x 300 x 300 |
| Ratings (Kw) | 3 | 3 | 4 | 4.5 | 7 |
| Exterior Finish | Epoxy Powder Coated / SS 304 / SS 316 | ||||
| Interior Finish | Sillimanite Muffle | ||||
| Insulation | Ceramic Pads | ||||
| Heating System | Coil Typed Kanthal A1 | ||||
| Continuous Operating Temperature | 900° C | ||||
| Maximum Operating Temperature | 1150° C | ||||
| Temperature Control Systems | PID | ||||
| Sensor | K Type | ||||
| Temperature Settings | Digital | ||||
| Temperature / Timer Display | Digital | ||||
| Heater Shealth Heater | Yes | ||||
| Power Source | 220 v , Single Phase , 50Hz | ||||
| Alarm and Safety Function | Optional | ||||
| Data Logging Facility | Optional | ||||
| IQ/OQ/QP | Optional | ||||
| Calibration Certificate | Optional | ||||